MenuSearch | Country: Netherlands | Currency: EUR
Excellent
3,903 reviews at Trustpilot.3,903 reviews
Fuma 2 Rev.B High Performance Quiet CPU Cooler €59.74
6 in stock
Add to Basket
(1 customer rating)
More variations available Show

Scythe Fuma 2 Rev.B High Performance Quiet CPU Cooler

Scythe’s Fuma 2 Rev.B features dual heatsinks to provide excellent performance and it’s supplied with exceptionally quiet Kaze Flex II PWM fans, it is also compatible with Intel’s LGA1700 socket.

Features

  1. Twin-Tower-Design
  2. Compact height without loss of cooling performance
  3. Flexible Fan mounting
  4. Equipped with reliable Slip Stream Series fans
  5. Intel and AMD compatible, LGA1700 ready

The Fuma 2 Rev. B has been revised and is now fully LGA 1700 compatible thanks to the H.P.M.S. IV mounting system. The Fuma 2 Rev. B follows the design principle of its predecessor and offers a powerful twin-tower heat sink with an asymmetrical structure. Six high-quality 6mm heatpipes connect the separate heatsinks to the massive copper base plate. All copper parts have been elaborately nickel-plated. The asymmetrical alignment and a recess on the back of the second cooling block allow unrestricted use of all memory banks. Even memory modules on the backside of the CPU socket are supported up to a height of 55 mm.

The Fuma 2 Rev. B ships with two new Kaze Flex II 120 PWM fans. In addition to a regular model, a slim version with a frame width of only 15 mm is also used to keep the dimensions low. The Fuma 2 takes advantage of the principle of a “Dual Fan Reverse Airflow” design, in which the fans rotate in opposite directions. This creates higher static pressure and increased and consistent airflow. The PWM range has been increased to 1,500 rpm to offer more reserves for peak loads. An additional fan can be installed to further maximise cooling performance. The required mounting brackets are included in the scope of delivery.

Twin tower design

The classic twin-tower design of the Fuma 2 is not centered directly above the CPU socket, but offset by inclined heat pipes. This asymmetrical design offers maximum free space for the memory banks. The cooling fins of the second tower are designed in such a way that RAM modules with a height of up to 55 mm can also be operated on the back of the CPU socket without restricting the effectiveness of the heat sink. Despite the enormous cooling surface, the Fuma 2 remains at a height of 154.5 mm and thus fits into any standard PC case.

Dual Fan Reverse Airflow

The Fuma 2 Rev. B CPU cooler uses two newly developed Kaze Flex II 120 fans, each working in a PWM range of up to 1,500 rpm. In addition, the fans rotate in opposite directions. This creates higher static pressure and increased and consistent airflow. In addition, a third fan can be mounted for more performance. Appropriate fan clips are included in the scope of delivery.

Kaze Flex II PWM Fans

Both of the Kaze Flex 120 II fans use a sealed fluid dynamic bearing (Sealed Precision FDB) that reduces friction and wear to a minimum thanks to a special oil film. Rubberised pads covering the frame have a decoupling effect and prevent the transmission of noise and vibrations to the case.

H.P.M.S. IV (Hyper Precision Mounting System IV)

The Fuma 2 Rev. B CPU Cooler uses the updated H.P.M.S IV mounting system which now offers full LGA 1700 compatibility. A pre-assembled mounting bar with spring-loaded screws ensures balanced pressure distribution. During the installation process, the universal backplate is securely fixed to the mainboard by rubberised spacers, making the process considerably easier.

SpecificationsFuma 2 Rev.B
Model NumberSCFM-2100
Socket compatibilityIntel LGA1700, LGA1200, LGA1150, LGA1151, LGA1155, LGA1156, LGA2011, LGA2066 and AMD AM4, AM3, AM2, FM1, FM2 *
Overall Dimensions (WxHxD)137 x 155 x 129 (including fan)
Height155 mm
Weight1000 g
AccessoryMounting parts for Intel- & AMD Sockets, two Kaze Flex II 120 Fans, Manual, Thermal Grease (Thermal Elixer 2), Fan Clips, Screwdriver
Baseplate Material / HeatpipesNickel-plated copper
Maximum TDPAll
Fan Specifications
Model NameKaze Flex II 120 Slim PWM and Kaze Flex II 120 PWM
Fan Model NumberSU1215FD12H-CNP and SU1225FD12M-CHP
Dimensions20 x 120 x 15 and 120 x 120 x 26 mm
Noise Level (max)27 dBA
Noise level (min)10 dBA
Air Flow300 (±200 rpm) ~ 1500 rpm (±10%), both fans
Fan Speed8.2 ~ 39.4 and 16.6 ~ 51.2 CFM
Static Pressure0.045 ~ 0.96 and .075 ~ 1.50 mmH²O
Bearing TypeSealed Precision FDB
Voltage12V
RGBNo
Warranty24 months
EAN barcode0812623021825
  • *Please note that an original backplate with screw mounting is required for installation on AMD motherboards. Please check before buying if the backplate is fixed by screws! If the backplate uses plastic-pins, mounting of this cooler is not possible.
SpecificationsFuma 2 Rev.B
Model NumberSCFM-2100
Socket compatibilityIntel LGA1700, LGA1200, LGA1150, LGA1151, LGA1155, LGA1156, LGA2011, LGA2066 and AMD AM4, AM3, AM2, FM1, FM2 *
Overall Dimensions (WxHxD)137 x 155 x 129 (including fan)
Height155 mm
Weight1000 g
AccessoryMounting parts for Intel- & AMD Sockets, two Kaze Flex II 120 Fans, Manual, Thermal Grease (Thermal Elixer 2), Fan Clips, Screwdriver
Baseplate Material / HeatpipesNickel-plated copper
Maximum TDPAll
Fan Specifications
Model NameKaze Flex II 120 Slim PWM and Kaze Flex II 120 PWM
Fan Model NumberSU1215FD12H-CNP and SU1225FD12M-CHP
Dimensions20 x 120 x 15 and 120 x 120 x 26 mm
Noise Level (max)27 dBA
Noise level (min)10 dBA
Air Flow300 (±200 rpm) ~ 1500 rpm (±10%), both fans
Fan Speed8.2 ~ 39.4 and 16.6 ~ 51.2 CFM
Static Pressure0.045 ~ 0.96 and .075 ~ 1.50 mmH²O
Bearing TypeSealed Precision FDB
Voltage12V
RGBNo
Warranty24 months
EAN barcode0812623021825
  • *Please note that an original backplate with screw mounting is required for installation on AMD motherboards. Please check before buying if the backplate is fixed by screws! If the backplate uses plastic-pins, mounting of this cooler is not possible.

Product Resources

Top AM4 Quiet CPU Coolers

Recently Viewed Products

The most honest PC reseller I have every dealt with - and yes, I have dealt with a lot!

Buying from a "small" reseller on-line is always a risk - product may be sub-standard, broken etc etc and then the major challenge of getting easy support and help (or worst case- your money back); especially for an assembled desktop PC. Whilst most resellers are prompt with comms before sales, you may struggle to hear from them after sales. However, Quiet PC proved to me that there are still good and honest traders out there!! I bought a mini PC for around £2k. I had some queries before buying which they promptly answered (thanks Simon) The product arrived, very well packed and within 24 hours of shipment. They kept me continuously updates about the build and delivery (thanks Ellen). The product was of superb workmanship - all parts as promised, good quality and well tested (and with Ubuntu installed as I had requested) I wanted to push the performance of the PC further, and thus, contacted them again. And the after-sales support team was AMAZING! (thanks Andy). All-in-all I can say is that you can buy from Quiet PC without any worries and second thoughts. Their products are as advertised and to top it all the after sales support is amazing. Good work guys - keep it up and all the best.
(Review via Trustpilot)